PARwise Spares Pack (2x Cosine Corrector 5x screws)

Includes 2x parts cosine corrector (white material) and 5x screws Compatible with ITC Reefculture PARwise and PARwise PRO (all models) PARwise Cosine Corrector Replacement Instructions Tools Required: Torx 6 screwdriver / clean damp cloth / cosine replacement material/ tweezers Method: 1. Start by washing and drying your hands 2. Prepare a clean, dry workspace free from dust. 3. Unscrew the 5x Torx screws (T6) from the cosine cover on the PARwise device 4. Lift the cover and place the screws aside safely 5. Remove the damaged cosine material from the device (this may be recycled) 6. Using a clean, damp cloth; wipe and clean the crystal lens (cosine cover). Make sure it is completely dry before continuing 7. Carefully unpackage the replacement cosine material and use tweezers to remove, gently holding the very outside of the material 8. Lay the new material centralised over the glass lens 9. Align the cosine cover back into position 10. Fit the screws all of the screws loosely, then work around the wheel to tighten each screw- DO NOT overtighten, finger tight is preferred, to ensure you do not strip the plastic- a light touch is the key! 11. Your device is now complete and ready to use